You are here: Products » Tooling » Hydraulic Tools

Hydraulic tools

Huck Hydraulic Installation Tooling Range

2480

The Model 2480 is a very lightweight tool which provides for the high-speed installation of a wide range of HuckBolt and Huck blind bolt fasteners. The tool has only one moving part, resulting in outstanding reliability and minimal maintenance. The tight centerline-to-edge measurement of the Model 2480 and its light weight (2.21 pounds) allow for its use in limited clearance areas.

More Information »


Download Datasheet 

2503

The 2503 is a lightweight tool for use in a wide range of high-speed production applications. With only one moving part, the tool provides for increased reliability and requires minimal maintenance. An offset piston design allows the 2503 to easily fit in limited clearance applications.

The 2503 tool has an integral 3.64m hose set.  

More Information »


Download Datasheet 

2580

The Model 2580 is a lightweight tool (only 6.58 pounds) designed for use in a wide range of high-speed production applications. With only one moving part, the tool provides for increased reliability and requires minimal maintenance. An offset piston design allows the Model 2580 to easily fit in limited clearance applications.

More Information »


Download Datasheet 

2600

The Model 2600 is a lightweight and versatile installation tool designed to use with a wide range of Huck blind fasteners and HuckBolt fasteners. The tool’s compact size allows it to fit into limited clearance applications, while its light weight provides for outstanding operator productivity.

More Information »



2620

The Model 2620 is a lightweight and versatile installation tool designed to use with a wide range of Huck blind fasteners and HuckBolt fasteners. The tool’s compact size allows it to fit into limited clearance applications, while its light weight provides for outstanding operator productivity.

More Information »


Download Datasheet 

2620-PT

The Model 2620-PT is a pass-through hydraulic tool that replaces the 5901. The tool is capable of installing 12MM, 3/8” and 1/2" diameter Huck lockbolts and blind bolts. This tooling is fully compatible with existing pass-through nose assemblies.

More Information »


Download Datasheet 

2624

The 2624 is a lightweight ergonomic alternative to the 585 or 586 tool for installing 5/8” and 16MM diameter Huck lockbolts and blind bolts. This line of tooling is fully compatible with existing nose assemblies.

More Information »


Download Datasheet 

3585

Offering durable construction, advanced hydraulics, and safe, ergonomic design, the 3585 installation tool is easy-to-hold and efficient to use. An improved piston and cylinder design promote longer life. In addition, the nose adapter can be removed through the back of the tool for ease of repair. The 3585 is ideal for installation of all -20 (5/8”) and -24 (3/4") pintail-style lockbolts. Stroke: 1.812”; Weight: 19 lbs.

More Information »



3585PT

The Huck 3585PT Hydraulic Installation Tool goes beyond the 3585 by offering the capability to install Huck-Spin and Huck-Spin2 fasteners with a pass-through piston and end cap design. In addition, the 3585PT is fully compatible with Huck BobTail® fasteners. The stroke has been increased to 1.900” allowing the capacity to install and remove 20mm fasteners. The 3585PT can be ordered separately or as included with the new “TRK” Truck Repair Kits which come complete with a 940 Powerig®. A 15 ft. hose kit with electric trigger is included with every 3585PT. Weight: 19 lbs.

More Information »



2630

The Model 2630 is a lightweight ergonomic alternative to the 506 tool for installing 7/8" product. This line of tooling is fully compatible with existing nose assemblies.

More Information »



507

The Model 507 is a heavy-duty tool sized for the installation of 1" C50L HuckBolt fasteners. This rugged tool provides high-speed installation in a wide range of production applications.

The Model 507's basic design, utilizing a simple cylinder and piston assembly, offers outstanding reliability. This tool also features an unloading valve, which relieves hydraulic pressure at both ends of the stroke, and a pintail ejector positioned on the nose assembly. A heavy duty production tool, the Model 507 weighs 43 pounds.

More Information »


Download Datasheet 

12142

The Model 12142 is designed to accommodate the large lockbolts used in track fastening applications. This proven hydraulic tool features rugged 60 pound construction for durability in the field, and the choice of a gasoline or electrically powered hydraulic unit. The design of the Model 12142 incorporates the nose assembly for installation for the industry standard 1-3/8” diameter C50L HuckBolts. The tool’s compact dimensions allow it to work well in limited clearance applications.

More Information »



BTT25

The BTT25 was developed specifically for installation of BobTail 12mm to 14mm fasteners.  As with all BTT (BobTail Tool) Tools, the BTT25 is configured for limited clearance applications.  The unique hydraulic piston arrangement allows for a small diameter cylinder, which gives a small center-to-edge distance along the complete length of the tool.

More Information »



BTT35

The BTT35 was developed specifically for installation of the BobTail 16mm fastener.  As with all BTT (BobTail Tool) Tools, the BTT35 is configured for limited clearance applications.  The unique hydraulic piston arrangement allows for a small diameter cylinder, which gives a small center-to-edge distance along the complete length of the tool.

More Information »



BTT57

The BTT57 was developed specifically for installation of the BobTail 20mm fastener.  As with all BTT (BobTail Tool) Tools, the BTT57 is configured for limited clearance applications.  The unique hydraulic piston arrangement allows for a small diameter cylinder, which gives a small center-to-edge distance along the complete length of the tool.

More Information »



BTT35LS

HUCK Model BTT35LS is a Hydraulic Installation Tool that installs and removes BOBTAIL fasteners in limited clearance applications. This tool design consists of a cylinder housing with two chambers to accommodate two tandem pull pistons. This feature increases pull capacity while maintaining optimum centerline-to-edge clearance.

This lightweight tool is intended for use with Huck standard industrial POWERIG® Hydraulic Units (models 913H, 918, d 940, and 968) or equivalent, sold separately.

Except for nose assembly, tool is complete with hydraulic hoses, couplings and electric control cord ready to be attached to POWERIG® Hydraulic Units hoses and control cord.

More Information »



SFBTT8

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



SFBTT20

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



SFBTT32-24

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



SFBTT32-M20

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



SF20

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



SF32

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



SF46

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

More Information »



HS37

Designed for rapid, easy installation of 12mm HuckSpin® fasteners, the HS37 is an ergomonic, lightweight installation tool offering a range of high-performance advantages. 

More Information »



HS52 (Huck-Spin Tool)

The HS52 Huck-Spin Installation Tool is configured to be suspended from tool balancing devises adjacent to assembly lines/work stations. However, it can be hand held if necessary. Various configurations are available allowing the tool to be customised to achieve the optimum access to the application and ergonomics.

More Information »


Download Datasheet 

HSSFT-M12

Employing Huck’s proprietary swageforward design, the HSSFT-M12 offers rapid, easy installation of HuckSpin® fasteners. This advanced tool makes the installation process quicker and easier by reducing the force required to install each fastener.

Stroke: 1.488 in 
Pull Force: 14,160 lbs @ 6,000 psi
Weight: 18 lbs.
Return Force: 4,880 lbs @ 4,000 psi

More Information »



HSSFT-M16

Employing Huck’s proprietary swageforward design, the HSSFT-M12 offers rapid, easy installation of HuckSpin® fasteners. This advanced tool makes the installation process quicker and easier by reducing the force required to install each fastener.

Stroke: 1.488 in
Pull Force: 22,266 lbs @ 6,000 psi
Weight: 23 lbs
Return Force: 8,220 lbs @ 4,000 psi

More Information »